Platform Trolleys - Pneumatic Wheels

Platform Trolleys with Pneumatic Wheels

Platform trolleys with pneumatic (air-filled) wheels are designed for environments where smooth floors cannot be guaranteed — loading docks, outdoor yards, ramps, workshops with uneven concrete, and mixed indoor-outdoor operations. The air-filled tyres absorb vibrations and roll over obstacles that would stop solid wheels, while still carrying loads up to 400 kg.

This category covers two complementary wheel sizes: the STACH series with large 260-300 mm pneumatic tyres for heavy-duty and outdoor use, and the ROMEK series with compact 200 mm pneumatic wheels for lighter indoor-outdoor environments. All models feature a welded steel frame with powder-coated finish, and are manufactured 100% in-house at Agromech in Poland — including the tyres, inner tubes, and rims.

STACH series — heavy-duty, 260-300 mm pneumatic tyres

The STACH series is Agromech’s flagship platform trolley range. Built around large-diameter pneumatic wheels, these trolleys handle rough terrain, gravel paths, loading ramps, and uneven warehouse floors with ease. Two size tiers are available: the STACH III/IV (1250-1300 x 750 mm, 300 mm wheels) for maximum deck area, and the STACH V (1000 x 630 mm, 260 mm wheels) for tighter spaces. The key differentiator: Agromech’s own 300 mm pneumatic wheels deliver superior shock absorption and traction compared to the 200 mm wheels found on most competitors’ trolleys.

Model	Overall (mm)	Deck type	Wheels	Sides	Best for
STACH II	1250 x 750	Open steel tube frame	300 mm	Push handle	Budget option, open frame
STACH III	1250 x 750	Plywood 12 mm	300 mm	Push handle	All-round workhorse
STACH III AL	1250 x 750	Aluminium 2 mm	300 mm	Push handle	Wet/hygienic environments
STACH III mesh floor	1250 x 750	Steel wire mesh	300 mm	Push handle	Nurseries, ventilation needed
STACH III (1600)	1600 x 750	Plywood 12 mm	300 mm	Push handle	Extra-long loads
STACH IV with rail	1300 x 750	Plywood 12 mm	300 mm	Tubular rail 120 mm	Loads that may slide
STACH IV with edge	1300 x 750	Plywood 12 mm	300 mm	Flat bar edge 20 mm	Minimal load containment
STACH IV mesh-sided	1300 x 750	Plywood 12 mm	300 mm	4 mesh panels 500 mm	Loose/stacked items
STACH V	1000 x 630	Plywood 12 mm	260 mm	Push handle	Compact, tighter spaces
STACH V AL	1000 x 630	Aluminium 2 mm	260 mm	Push handle	Compact, wet environments
STACH V mesh-sided	1000 x 630	Plywood 12 mm	260 mm	4 mesh panels 500 mm	Compact, loose items

All STACH models share a 400 kg load capacity, roller bearings, welded steel frame (powder coated RAL 5010), and a removable push handle. The removable handle also simplifies storage and palletised shipping.

ROMEK series — compact, 200 mm pneumatic wheels

The ROMEK pneumatic range brings the same cushioned ride to a more compact, lighter platform. With 200 x 50 mm pneumatic wheels and ball bearings as standard, these trolleys suit indoor environments with occasional rough patches — thresholds, dock plates, expansion joints, and semi-rough floors — where solid wheels would judder but full 300 mm tyres are unnecessary.

Model	Deck (mm)	Deck type	Weight	Best for
ROMEK H-1	760 x 480	Plywood 12 mm	19 kg	Tight spaces, archives
ROMEK K-1	960 x 610	Plywood 12 mm	21 kg	Everyday workhorse
ROMEK VII	1210 x 610	Plywood 12 mm	26 kg	Narrow aisles, long loads
ROMEK III	1210 x 780	Plywood 12 mm	29 kg	Maximum deck area (0.94 m2)

All ROMEK pneumatic models share a 400 kg load capacity, ball bearings, welded steel frame (powder coated RAL 5010), and a 2 fixed + 2 swivel wheel layout.

JEDREK series — two-wheel drawbar trolleys

The JEDREK is a specialised two-wheel drawbar trolley designed for pulling rather than pushing. The large 300 mm pneumatic wheels and sturdy steel frame handle rough outdoor surfaces — farm yards, nurseries, gravel paths — where four-wheel platform trolleys may struggle. The JEDREK pallet is the transport platform; the JEDREK ramp is a separate loading accessory that allows wheeled carts or heavy items to be rolled onto the platform without lifting.

Model	Type	Best for
JEDREK pallet	Two-wheel drawbar trolley with platform	Farms, nurseries, warehouses — crates, sacks, boxes
JEDREK ramp	Loading ramp accessory	Roll-on loading without lifting

STACH vs ROMEK pneumatic — which to choose?

	STACH (260-300 mm)	ROMEK (200 mm)
Wheel diameter	260-300 mm	200 mm
Bearings	Roller	Ball
Terrain	Rough, outdoor, gravel, ramps	Indoor with mixed surfaces, thresholds
Frame weight	Heavier (35-55 kg)	Lighter (19-29 kg)
Deck options	Plywood, aluminium, wire mesh	Plywood only
Side options	Open, rail, 4 mesh panels	Open (flat deck only)
Push handle	Removable	Fixed

In short: choose STACH for outdoor and rough-terrain use, choose ROMEK pneumatic for primarily indoor environments where solid wheels are not quite enough.

Why pneumatic wheels?

Pneumatic (air-filled) wheels absorb vibrations and roll over obstacles that solid rubber wheels cannot handle. They protect fragile loads from shock damage, reduce operator fatigue on uneven floors, and provide better traction on rough or soft surfaces. The trade-off is periodic pressure checks and the possibility of punctures — but with Agromech’s in-house tyre production, replacement tyres, inner tubes, and complete wheel assemblies are always available.

For clean indoor environments with smooth floors where zero maintenance is preferred, see the Platform Trolleys with Solid Wheels category — featuring the ROMEK series with 160 mm non-marking solid rubber wheels.

Applications

• Warehouses, distribution centres, and logistics hubs
• Loading docks, ramps, and yard operations
• Production halls and workshops
• Farms, nurseries, and greenhouses
• Construction sites and outdoor yards
• Retail stores and wholesale distributors
• Mixed indoor-outdoor environments

Why Agromech?

Every trolley in this category is manufactured entirely in-house at our facility in Lubianka, Poland — from the steel frame and powder coating to the pneumatic wheels, tyres, inner tubes, and rims. This complete vertical integration means consistent quality, fast lead times, and full spare parts availability. A worn tyre or inner tube can be replaced individually, extending the trolley’s service life well beyond its 24-month warranty. We have been manufacturing handling equipment since 1975.